Design of surface nanostructures for chirality sensing based on quartz crystal microbalance

• Yinglin Ma,
• Xiangyun Xiao and
• Qingmin Ji

Beilstein J. Nanotechnol. 2022, 13, 1201–1219, doi:10.3762/bjnano.13.100

• modified QCM sensors [29]. The sensor layers were constructed by self-assembly of ʟ(ᴅ)-Val monolayers or comb-teeth-type grafted polymer brushes with ʟ(ᴅ)-Val. According to the frequency shifts upon bovine serum albumin (BSA) adsorption, ʟ-Val-modified sensors were shown to have a stronger binding to BSA

pH-Controlled fluorescence switching in water-dispersed polymer brushes grafted to modified boron nitride nanotubes for cellular imaging

• Saban Kalay,
• Yurij Stetsyshyn,
• Volodymyr Donchak,
• Khrystyna Harhay,
• Ostap Lishchynskyi,
• Halyna Ohar,
• Yuriy Panchenko,
• Stanislav Voronov and
• Mustafa Çulha

Beilstein J. Nanotechnol. 2019, 10, 2428–2439, doi:10.3762/bjnano.10.233

• (DU145) and are suitable for further evaluation in cellular imaging applications. Keywords: boron nitride nanotubes; cellular imaging; fluorescence; pH switching; polymer brushes; surface modification; Introduction In recent years, considerable effort has been devoted to the development of hybrid

• polymer brushes via polymerization initiated from their surface [12][28]. In particular, BNNTs were covalently modified with hydrophobic polystyrene or poly(glycidyl methacrylate) polymer brushes [28]. The modified nanotubes demonstrated high dispersibility in a large number of organic solvents. In our

• chloroanhydride fragments in oligoperoxide molecules [12]. The second step involved grafting copolymerization of acrylic acid and fluorescein acrylate initiating “from the surface” of oligoperoxide-functionalized BNNTs to fabricate grafted polymer brushes. The functionalized BNNTs were characterized using

Nanoporous silicon nitride-based membranes of controlled pore size, shape and areal density: Fabrication as well as electrophoretic and molecular filtering characterization

• Axel Seidenstücker,
• Stefan Beirle,
• Fabian Enderle,
• Paul Ziemann,
• Othmar Marti and
• Alfred Plettl

Beilstein J. Nanotechnol. 2018, 9, 1390–1398, doi:10.3762/bjnano.9.131

• polymer brushes [31]). During this process, precise control of the pull-out velocity and the suppression of any vibrations are essential and determine the quality of the homogeneous areal density of the NPs, and thus, the related density of the pores later on. After drying of the micellar film, the

Methods for preparing polymer-decorated single exchange-biased magnetic nanoparticles for application in flexible polymer-based films

• Laurence Ourry,
• Delphine Toulemon,
• Souad Ammar and
• Fayna Mammeri

Beilstein J. Nanotechnol. 2017, 8, 408–417, doi:10.3762/bjnano.8.43

• grafting processes, living-radical polymerization (e.g., atom-transfer radical polymerization (ATRP), reversible addition–fragmentation chain transfer (RAFT) or nitroxide-mediated polymerization (NMP)) makes it possible to establish robust polymer–particle bonds and then grow polymer brushes of controlled

Template-controlled piezoactivity of ZnO thin films grown via a bioinspired approach

• Nina J. Blumenstein,
• Fabian Streb,
• Stefan Walheim,
• Thomas Schimmel,
• Zaklina Burghard and
• Joachim Bill

Beilstein J. Nanotechnol. 2017, 8, 296–303, doi:10.3762/bjnano.8.32

• ]. Additionally, organic templates are used to modify the surface of the substrate. Especially self-assembled monolayers (SAMs) [23][24], thin polymer brushes [25] or polyelectrolyte multilayers (PEL) [26] were successfully applied for the deposition of ZnO thin films. With these molecules, a multitude of

Three-gradient regular solution model for simple liquids wetting complex surface topologies

• Sabine Akerboom,
• Marleen Kamperman and
• Frans A. M. Leermakers

Beilstein J. Nanotechnol. 2016, 7, 1377–1396, doi:10.3762/bjnano.7.129

Self-assembled anchor layers/polysaccharide coatings on titanium surfaces: a study of functionalization and stability

• Ognen Pop-Georgievski,
• Dana Kubies,
• Josef Zemek,
• Neda Neykova,
• Roman Demianchuk,
• Eliška Mázl Chánová,
• Miroslav Šlouf,
• Milan Houska and
• František Rypáček

Beilstein J. Nanotechnol. 2015, 6, 617–631, doi:10.3762/bjnano.6.63

• PDA units can establish a wide range of non-covalent bonds through π stacking, hydrogen bonding, and van der Waals- and hydrophobic-interactions. PDA films have been used as the anchor layers of non-fouling polymer brushes [32][33][34], substrates for cell adhesion [35][36] and as platforms for

Macromolecular shape and interactions in layer-by-layer assemblies within cylindrical nanopores

• Thomas D. Lazzara,
• K. H. Aaron Lau,
• Wolfgang Knoll,
• Andreas Janshoff and
• Claudia Steinem

Beilstein J. Nanotechnol. 2012, 3, 475–484, doi:10.3762/bjnano.3.54

• barriers that limit the amount of material that can be stepwise incorporated. Confinement in nanoporous environments can, for example, decrease the apparent pKa values of cationic polymer brushes, a priori polymerized in pores with 10–40 nm pore diameters, by more than a full pH unit [33]. Dobrynin and co

Colloidal lithography for fabricating patterned polymer-brush microstructures

• Tao Chen,
• Debby P. Chang,
• Rainer Jordan and
• Stefan Zauscher

Beilstein J. Nanotechnol. 2012, 3, 397–403, doi:10.3762/bjnano.3.46

• -initiated atom-transfer radical polymerization (SI-ATRP) to fabricate patterned polymer-brush microstructures. The advantages of the CL technique over other lithographic approaches for the fabrication of patterned polymer brushes are (i) that it can be carried out with commercially available colloidal

• entail instrumental complexity. As an inexpensive alternative to conventional lithography, CL provides new possibilities to create patterned polymer brushes. So far only one of the CL strategies, using the SMM footprint as the mask, has been demonstrated for fabricating patterned pillar [23] or cavity

• [11][24] polymer brushes, and we recently reported how SMM could be used as µCP stamps to fabricate cone-shaped polymer brushes [25]. In this letter we report how we exploit a range of robust and simple patterning strategies offered by colloidal lithography, and combine them with surface-initiated

Surface induced self-organization of comb-like macromolecules

• Konstantin I. Popov,
• Vladimir V. Palyulin,
• Martin Möller,
• Alexei R. Khokhlov and
• Igor I. Potemkin

Beilstein J. Nanotechnol. 2011, 2, 569–584, doi:10.3762/bjnano.2.61

• –shell cylindrical polymer brushes with a solvophobic inner (core) block and a solvophilic outer (shell) block in selective solvents [49]. Combs with two types of incompatible side chains (binary brushes) obviously represent quite intriguing objects due to the potential for intrachain segregation leading

Sensing surface PEGylation with microcantilevers

• Natalija Backmann,
• Natascha Kappeler,
• Thomas Braun,
• François Huber,
• Hans-Peter Lang,
• Christoph Gerber and
• Roderick Y. H. Lim

Beilstein J. Nanotechnol. 2010, 1, 3–13, doi:10.3762/bjnano.1.2

• transition in the layer (see Discussion). To further characterize the conformation of the PEG layer, we repeated our AFM measurements in 20% 2-propanol which is a poor solvent for PEG. This is because polymer brushes are known to form more compact “collapsed” clusters, known as pinned micelles, in poor

• of eight reference cantilevers was subsequently subtracted from the average deflection of eight sensing cantilevers to obtain the differential response. Mushrooms versus Polymer Brushes: a sketch illustrating how surface-tethered polymer chains can take on either “mushroom” -like or “brush”-like